THOMSON 29DMV88KH, Руководство по обслуживанию

Страница: 19 / 43

TCL-THOMSON Electronics R&D Center (Shen’Zhen Lab)
Chassis Name MS21-SOEM Serial No.
Issued on
2006-11-22
Page
Updated on 2007-09-11 Version
AUTO OFFSET OFF Auto offset switch, auto offset is effective when it is “ON”.
15. Designer's menu:
In the factory mode, press “-/--/---“ key on RC to enter “IIC CONTROL” item. The factory can’t adjust this
item.
16. An elucidation for adding items concerning factory menu:
Two more items at the ninth page:
DCXO
DCXO AUTO
Adjust DCXO before PE making seed. Adjust DCXO method: choose a PAL B/ G channel with NICAM ,then
choose DCXO AUTO at the factory menu ninth page, software will adjust the crystal frequency automatically.
Note:This adjustment must be done for every set on the line.
(1) PE adjust white balance and geometry each mode in advance, then enter the "Designer's menu", choose
"INIT AUTOOFFSET" to save the offset. So seed has been completed.
(2) In the factory, just adjust the white balance and geometry in the TV60P mode, then set the "AUTO
OFFSET" switch "ON" as the above 14 description, after that choose the "AUTO OFFSET" at the 2nd and
3rd page separately in the factory menu, so the offset will be saved to each mode.
17. Initial setting:
Last working procedure need to set the initial setting, method is: Enter the factory menu, press the geometry
reset key on RC to set the initial setting. After that, the machine will be standby.
18.Important notice:
On the digital board, UD3(13-00M24C-32P) must be burned EDID before
surface mount.
19