THOMSON 29DMV88KH, Руководство по обслуживанию

Страница: 16 / 43

TCL-THOMSON Electronics R&D Center (Shen’Zhen Lab)
Chassis Name MS21-SOEM Serial No.
Issued on
2006-11-22
Page
Updated on 2007-09-11 Version
Enter the factory mode, and press “2” key on RC to enter the “H ADJ” menu.
HCENT Based on request Horizontal center
HSIZE Based on request Horizontal size
HPARA Based on request Parallelogram correction
HTRAP Based on request Trapezium correction
HPARA Based on request Parabola correction
HBOW Based on request Bow correction
HUPCN Based on request Horizontal Top Corner Correction
HLOWCN Based on request Horizontal Bottom Corner Correction
E-W EHT 40 nonadjustable ˄ E-W EHT ˅
HTIMING 7 nonadjustable
˄
Horizontal timing
˅
SCANMODE *** Scan mode
AUTO OFFSET *** Geometry auto offset
7. Geometry adjustment in PC, HDTV mode:
Input the PC test signal or HDTV test signal in the PC or HDTV mode, then enter the factory mode, press
“2”or “1”key to adjust the H and V as above. The adjustable items in PC mode: 640
h
480/60Hz
ˈ
800
h
600/60Hz
ˈ
1024X768/60HZ.
The below table is the default value of D6 and D7 in the HDTV and PC mode: in the table (x) for hd29v88
model and without VGA mode
HDTV PC
1080I/60HZ 525P 1080I/50HZ 720P 625P 1080P/60HZ
4:3 16:9 4:3 4:3 16:9 4:3 16:9 4:3 4:3 16:9
640X
480
/60HZ
800X
600
/60HZ
1024
X768
/60HZ
D6 230
(172)
230
(172)
230
(163)
230
(172)
230
(172)
230
(172)
230
(172)
230
(169)
230
(167)
230
(167)
230 230 230
D7 54 54 54 54 54 54 54 54 54 54 54 54 54
8. Geometry adjustment of blue background and the OSD position:
These model does not need to adjust the Geometry adjustment of blue background and the OSD position.
9.TXT and brightness delay adjustment:
In the factory mode, press “6” key to enter this item:
Adjustable items Default setting Remark
TXT-ON 1 TXT(diagram text)switch
16