- EN 9 -
7)
Press the “SCAN +” & “SCAN -” buttons to search for the desired preset station.
8)
Press “PRE +” button to confirm and listen to your desired radio stations.
Manual memory preset (DAB version)
1) Use the Automatic scan or Manual scan, until you have found the radio station which you are
looking for.
2) Press “SCAN / MODE” button.
3) Press “SCAN+” or “SCAN-” button to choose the preset station number.
4)
Press “ENTER / CLOCK / PRESET” button to confirm chosen preset station number.
5) Once the stations were preset, Press and hold “ENTER / CLOCK / PRESET” button.
6) Press “SCAN+” or “SCAN-” button to search for the desired preset station.
7)
Press “ENTER / CLOCK / PRESET” button to confirm and listen to your desired radio stations.
FM Menu (DAB version only)
In FM mode, press the “MENU / SNOOZE / DIMMER” button to enter the FM menu. Press “SCAN+”
or “SCAN-” buttons to choose the following FM menus and confirm with ”ENTER / CLOCK / PRESET”
button:
- Scan setting: Select the desired option for automatic station search.
• All stations: Search for all stations that can be received. In this case, station search also stops for
weak stations.
• Strong stations only: Only clear stations are searched.
- System
• Time
You can use the “SCAN+” or “SCAN-” button to select the desired sub-menu and confirm with ”ENTER /
CLOCK / PRESET” button.
<Set Time/Date> manual time and date setting
<Auto update> Choice of FM Update, DAB Update, Any or No Update
<Set 12/24 hour> Choice of 12 or 24 hour format
<Set date format> Choice of DD-MM-YYYY or MM-DD-YYYY
• Language
You can use the “SCAN+” or “SCAN-” button to select the language and confirm with ”ENTER / CLOCK /
PRESET” button.
• Factory Reset
Select an options with “SCAN+” or “SCAN-” button. Press “ENTER / CLOCK / PRESET” button to
confirm.
• SW version
You can see the current SW version of the unit.
Listening to the DAB (DAB version only)
Select the DAB mode with the “STANDBY / FUNCTION” button, until “DAB” is shown in the display.
The radio will automatically do a full scan of DAB+ stations. The list of stations is then stored, eliminating
the need for another full scan when the radio is turned on next time. When the scan is complete, the
stations are stored in alphabetical order. The first available station will be played back.
NOTE:
If there is no DAB+ reception at any time, change the position of the unit or adjust the antenna.
Press and hold the “SCAN / MODE” button for approx. 3 seconds to start a new search.
You can select the next or the previous station by using the “SCAN +” & ”SCAN -” buttons.
Confirm your selection with the “ENTER / CLOCK / PRESET” button.
