Thomas PROTOUGH 900 Скачать руководство пользователя страница 49

Страница: 49 / 165

4.6 900 HOUR SERVICE

Perform a complete 50 and 300 hour

service plus the following.

4.6A Engine Cooling System

The engine cooling system needs to

be flushed, and the coolant replaced after
900 hours of service.

1. Warm the engine to circulate the engine

coolant.

2. Shut off the engine.
3. Drain the coolant from the engine

(T90120). Connect a hose to the engine
block drain and place the other end of
the hose in a container.

4. Remove the drain plug from the radiator

assembly. Be sure to contain all waste
coolant.

5. Replace the radiator plug and shut off

the engine block drain.

6. Fill the engine with plain water and

warm the engine to operating tempera-
ture.

7. Drain the cooling system again. Use a

container to catch the waste water.

8. Replace the coolant drain plugs and

replenish with a 50/50 mixture of ethy-
lene glycol and clean water.

9. Overflow tank level (T90030).

Use care when draining the engine coolant.

It may be hot enough to burn the skin.

4. MAINTENANCE

CAUTION

Engine coolant drain

Overflow Tank

T90030

T90120

Wear rubber gloves and use eye protection

when handling coolant.

WARNING

Содержание PROTOUGH 900






































































































































































Результаты поиска

Содержание PROTOUGH 900

Отзывы:

Thomas PROTOUGH 900, Руководство владельца/оператора и каталог запчастей, Страница: 49 / 165

Результаты поиска

Содержание PROTOUGH 900

Отзывы: