Thomas PROTOUGH 900 Скачать руководство пользователя страница 43

Страница: 43 / 165

4. MAINTENANCE

4.4 50 HOUR SERVICE

4.4E Engine Cooling System

Check the coolant level daily. Add only

50/50 mixture ethylene glycol. Do not use
or mix in other types of coolant. Add
coolant to the overflow reservoir (T90030)
as required to be above the minimum cold
level.

Correct coolant mixture must measure

-32ºF (0ºC) using an accurate measuring
device.

The engine coolant needs to be flushed

and changed every year or after 900 hours
of operation, which ever comes first. See
section 4.6 for 900 hour service informa-
tion.

Check the radiator fins for obstruction

of damage. Clean the radiator using com-
pressed air and or flush with water.
Straighten bent fins carefully.

Do not exceed 40 PSI (276 kPa) when

servicing the radiator. Wear safety glasses

when using compressed air. Wear rubber

gloves when working with coolant.

WARNING

Wear rubber gloves and use eye protection

when handling coolant.

Add coolant

Coolant level

T90030

WARNING

Содержание PROTOUGH 900






































































































































































Результаты поиска

Содержание PROTOUGH 900

Отзывы:

Thomas PROTOUGH 900, Руководство владельца/оператора и каталог запчастей, Страница: 43 / 165

Результаты поиска

Содержание PROTOUGH 900

Отзывы: