- Version du 10/06/2020 -
Frequent questions
CAUTION
: Unplug the machine before any work is carried out.
Problems
Possible solutions
The unit does not start
(electric version)
- Check that the unit is connected to the electrical supply.
- Check the power supply (power failure).
- Check that the controller (7) is not set to 0.
- Check that the transparent lid (2) is properly closed and
that the safety contact (8) is correctly engaged ("click" when
opening and closing).
-If this is not the case, twist the plate slightly
outwards.
The motor or handle does not
engage the cage
- Check the centre plate: the cage axle must be engaged in
the one coming out of the motor or handle.
-If it is not the case: tighten the bolt
underneath the extractor.
The extractor is having trouble
running
- Check that there still is a marble inside the centre plate
- Replace the centre plate if it is worn out. (see p.8)
Adapt’matic cross bar and lid: User’s Guide
7/7
