32
4. MAINTENANCE
4.11 PERIODIC MAINTENANCE AND SERVICE SCHEDULE
ITEM
SERVICE REQUIRED
8 HOURS
50 HOURS
150 HOURS
300 HOURS
1000 HOURS
Engine Oil
Check level of engine oil and top up if necessary. Use
10W30 API Classification CF oil.
Engine Fuel
Check level and top up if necessary.
Hydraulic System
Check level and top up if necessary. Use 10W30 API
Classification SJ oil. Check hoses, fittings, etc.
Cooler
Check level and add if necessary. Fill with 50% mixture
of ethylene glycol and water. Check cooling fins for dirt.
Air Cleaner
Check indicator.
Tracks and Wheel Nuts
Check tracks for damage and check wheel nut torque.
80 ft. lbs.
Safety System
Verify Safety System is functional. See Section 2.3 .
Decals
Check for damaged safety or instruction decals (See
Section 5.3). If necessary replace.
Lubrication
Grease all hinge pin fittings and pivot bearings until
excess shows.
Hydraulic Oil Filter
Replace hydraulic oil filter element. Initial change only.
Engine Oil
Replace engine oil. Use API Classification CF oil. Initial
change only.
Engine Oil Filter
Replace engine oil filter. Initial change only.
Final Drive
Check chain, sprocket and bearing conditions..
Hydraulic Oil Filter
Replace hydraulic oil filter.
Axle Lubrication
Grease rear axle and pack front.
Engine Oil
Replace engine oil. Use API Classification CF oil.
Battery
Clean and protect battery terminals.
Fuel Filter
Replace fuel filter.
Engine Oil Filter
Replace engine oil filter.
Hydraulic Oil
Change hydraulic oil. Use 10W30 API Classification SJ
oil. Replace inlet strainers in the oil reservoir.
Engine Cooling System
Drain, flush and refill. Use 50% mixture of ethylene
glycol and water. Inspect coolant hoses.
https://www.tractormanualpdf.info/
