29
4. MAINTENANCE
4.7 FUEL SHUTOFF VALVE
The fuel shutoff valve is located under the step plate
of the Mini-Skid Loader (See Fig 4.7). Remove the
four bolts in the step plate to gain access to the fuel
shutoff valve.
4.8 ENGINE COOLING SYSTEM
CHECKING COOLANT LEVEL (Fig. 4.8)
1.
With the Mini-Loader shutdown and the engine
cool, remove the black knob.
2.
Swing the lid open.
3.
Slowly remove radiator cap.
4.
Check to see if coolant is visible in the bottow
of the neck. If not add but do not fill beyond the
bottom of the filler neck tube. If adding coolant
is required, fill with a 50% mixture of ethylene
glycol and water for cold weather protection.
The radiator cooling fins (See Fig. 4.8) must be kept
free of debris otherwise overheating of the engine
will occur. Inspect the radiator cooling fins for
damage or buildup of debris. Repair any damage
and, if necessary, flush the radiator with compressed
air to remove debris.
RADIATOR CAP
(located under lid)
BLACK KNOB
Fig. 4.8
RADIATOR
COOLING
FINS
FUEL FILTER REPLACEMENT
The fuel filter is located in the engine compartment
on the left hand side (See Fig. 4.7A). The fuel filter
should be replaced every 300 hours. To replace the
filter, close the fuel shutoff valve, located below the
operator’s step plate (See Fig. 4.7). Replace the
filter and ensure the clamps are secure. Open the
fuel shutoff valve. It is not a requirement to bleed air
from the fuel system. Follow Section 3.1 for starting
instructions.
Fig. 4.7
Fig. 4.7A
FUEL FILTER
FUEL SHUTOFF VALVE
https://www.tractormanualpdf.info/
