THOMAS DÖRR TD 8000 FILL & GO, Руководство по эксплуатации

Страница: 29 / 48

Seite 29 von 48
3. Shipping, storage and set up
3.1 Shipping
The following steps must be followed while transporting the machine:
► Never tilt or turn over the machine
► Check the machine in advance for any damage caused by the shipment
► Use the transportation safety device when shipping the machine
► When reshipping, make sure the machine has a straight and sturdy stance
► Do not place any transport goods on top of the machine
There will be no replacements or warranty claims eligible by improper transportation
methods.
3.2 Storage
Take note to the following information when storing the machine:
► Do not store the machine in a moist area
► Cover up, wrap up or keep the machine in its original packaging
► Assure a stable storing method
► Always keep in mind that the weight of the machine can be a factor when storing on
shelves
► Do not place any items on top of the machine
3.3 Unpacking
► Never tilt or turn over the machine
► Save the packaging for future shipments or dispose it properly
3.4 Set up
It is recommended to set up the cutlery polisher in the dish washing area.
► Place the machine on a safe and sturdy leveled surface
► Leave approximately 20 mm of space between the wall since the machine causes
light vibrations when running
► Operating and cleaning must be enabled from a safe stand point
► After the machine is in its correct position, push down the locking devices
on each roller wheel.
en