thomann Tri Flood MK II, Руководство пользователя

Страница: 29 / 48

This setting is only relevant if the unit is not controlled via DMX. The device can operate in
standalone mode or control connected devices of the same type that have to be configured as
‘Slaves’. When the display shows the desired value, press the [MODE] to confirm the selection
and return to the parent menu. To return there without changes, wait a minute.
Press the [MODE] button repeatedly until the top row of the display shows ‘SPEED’ . Now you
can adjust the speed for the preprogrammed automatic shows. Use the buttons [UP] and
[DOWN] to select either ‘000’ (programme stopped) or a value between ‘001’ and ‘031’
(lowest to highest programme speed).
This setting is only relevant if the unit is not controlled via DMX. When the display shows the
desired value, press the [MODE] button to confirm the selection and return to the parent
menu. To return there without changes, wait a minute.
Press the [MODE] button repeatedly until the top row of the display shows ‘SOUND’ . Now you
can adjust the sensitivity of the built-in microphone for the sound control. Use the buttons
[UP] and [DOWN] to select either ‘SENS 000’ (microphone off) or a value between ‘SENS 001’
and ‘SENS 031’ (lowest to highest sensitivity).
This setting is only relevant if the unit is not controlled via DMX. When the display shows the
desired value, press the [MODE] button to confirm the selection and return to the parent
menu. To return there without changes, wait a minute.
Programme speed
Microphone sensitivity
Operation
Tri Flood MK II 15×15 W RGB
29