thomann Stairville Quad TR1, Руководство пользователя

Страница: 23 / 72

When you configure a group of devices in ‘Master / Slave’ mode, the first unit will control the
others. This feature is especially useful to start a show without much programming. Connect
the DMX output of the master unit to the DMX input of the first slave unit. Then connect the
DMX output of the first slave unit to the DMX input of the second slave unit and so on.
Press the lock of the battery holder to the centre of the housing and pull out the battery holder
like a drawer. Insert the battery. The battery is correct if the positive pole points to the housing
base of the remote control. Slide the battery holder back into the remote until it clicks into
place.
When shipping, the battery is already installed in the remote and protected against discharge
by a transparent plastic foil. Remove the plastic foil prior to first use.
Connections in ‘Master /
Slave‘ mode
Inserting the battery into the
remote control
Starting up
Outdoor Stage PAR Quad TR1
23