7.9 5-channel DMX master mode
In this mode, the device operates as a DMX controller in 5-channel mode. The 5-channel mode
is used to control both the current and the older revision of the LED PARs. The connected slave
devices must be set as 5-channel slaves (
Ä
Chapter 7.8 ‘5-channel DMX slave mode’ on page 43
).
To enable the 5-channel DMX master mode, set the 4-way DIP switch on the rear side of the
LED PAR according to the following table:
SW4
SW3
SW2
SW1
Mode
X
1
0
0
5-channel DMX master mode
0 = DIP switch is in OFF position. 1 = DIP switch is in ON position. X = see below for more infor-
mation.
Mode selection
Operating
PAR64 PRO 36x3WPar56 Pro 24x3W Mini Stage Par 7x3W
Stage PAR 18 Tri-Color LED3W
51