3 different patterns are available: e.g. all connected LED PARs can show the same pattern, or
each device shows a different one, or follow programmes or fade in / outs or blendings. The
individual steps within the patterns can be controlled by the rhythm of the music or using a
controller. The sensitivity of the sound-control is adjustable. The colour patterns offer a 100%
colour mode, a 100% / 50% colour mode as well as a 100% / 75% / 50% / 25% colour mode.
The colours are then selected randomly.
In this mode, the LED PAR is used as DMX slave. The 5-channel DMX slave mode utilises built-in
features of the LED PARs, which are controlled via the DMX signal. An external DMX controller
controls the LED PAR.
The 3-channel slave mode is for use with a standard DMX controller. The LED PAR can be con-
trolled via all 512 channels. Each colour is controlled via one DMX channel.
7.2.2 Stand-alone modes
The Auto-fade mode is available with 3 different patterns for fade in / outs or blendings.
The times for fade in / outs or blendings can be determined exactly by 9 time settings.
5-channel DMX slave mode
3-channel DMX slave mode
Auto-fade mode
Operating
LED PAR
28
