thomann STAIRVILLE LED Commander 16/2, Руководство пользователя

Страница: 32 / 48

1.
Keep the [PROGRAM
½
RECORD] button pressed for three seconds to switch to Program/
Record mode.
2. Use the [CHASE] buttons to select the sequence you wish to expand. To do this, switch
between the two memory banks using the toggle button if need be.
3.
Briefly press the [MIDI
½
IN SET] button.
ð
The associated display LED flashes.
4.
If necessary, use the and buttons to select the step number under which you wish to
insert the program step.
5.
Use the [FIXTURE] buttons to select the channel you wish to program.
6. Use the Flash controllers 1 to 8 to set the required values.
7.
Press the [PROGRAM
½
RECORD] button to save the new values.
ð
All display LEDs flash three times.
8.
Repeat steps 4 to 7 to add further program steps. The 16 memory locations can be
assigned a total of 2,000 program steps.
9.
Hold the [PROGRAM
½
RECORD] button down for three seconds to exit recording mode.
Inserting a program step
Operation
DMX controller
32