thomann STAIRVILLE LED Commander 16/2, Руководство пользователя

Страница: 29 / 48

1.
Keep the [PROGRAM
½
RECORD] button pressed for three seconds to switch to Program/
Record mode.
2. Use the [FIXTURE] buttons to select the channel you wish to program.
3.
Use the Flash controllers 1 to 8 to set the required values.
4.
Press the [PROGRAM
½
RECORD] button and then for around one second the button of
the scene you wish to overwrite.
ð
All device LEDs flash briefly.
5.
Hold the [PROGRAM
½
RECORD] button down for three seconds to exit recording mode.
Scenes that are already allocated are indicated by the LED lighting up blue next to the
relevant scene button. These can also be overwritten if required.
Programming scenes
Operation
LED Commander 16/2
29