thomann Stairville DMX Invader 1024 NET, Руководство пользователя

Страница: 27 / 40

6.4 Editing a Chase
6.4.1 Inserting steps in or removing from a chase
The device can store 62 chaser programmes, each with up to 100 steps. Steps corre‐
spond to scenes.
1.
Press [PROGRAM] to enter the edit mode.
ð
The [PROGRAM] LED flashes.
2.
Press [CHASE (A)] or [CHASE (B)] and the number buttons [1 … 31] to select the
number of the chase you want to edit.
3.
To insert a new step into the chase, press [INSERT] .
ð
The sum of the steps in the chase and the number of the current step are
shown in the display. The last step of a chase is marked with a *.
4. To copy the current step, press [COPY] .
5.
To copy all the steps of a chase, press and hold [COPY] for 1 second.
6. To insert a copied step from another chase into the current chase, press
[PASTE] .
7. To delete the current step, press [DELETE] .
6.4.2 Editing a step in a chase
1.
Press [STEP +] or [STEP - ] to select the step in a chase you want to edit.
2. Press and hold [TIME] while turning the jog wheel [X/SPEED] to set the running
speed of the current step.
3. Press and hold [TIME] while turning the jog wheel [Y/CROSS] to set the fade
time before and after the current step
6.4.3 Assigning external devices to a chase
1. Press [FIXTURE (A)] or [FIXTURE (B)] and the number buttons [1 … 31] to select
the external device you want to assign to the chase.
2. Set the values for the external device with the channel faders [1 … 18] .
3.
To exit Edit mode, press [PROGRAM] .
ð
Chase editing is complete.
Operating
DMX Invader 1024 NET
27