thomann Stairville DMX Invader 1024 NET, Руководство пользователя

Страница: 18 / 40

6 Operating
6.1 Changing basic settings
6.1.1 Calling up the menu
1.
Press and hold [SETUP] for at least 2 seconds to enter the main menu.
2. Turn the jog wheel [Y/CROSS] to the left or right to select the desired submenu.
3.
When the desired submenu is highlighted, press the jog wheel [Y/CROSS] .
ð
The submenu opens up.
4.
To return to the next higher menu level without changes, press [SETUP] .
5. To return to the start screen, press [SETUP] for at least 2 seconds.
6.1.2 Changing parameter or value
1.
Use the jog wheel [Y/CROSS] to select the parameter you want to change in the
desired submenu.
2.
When the desired parameter is highlighted, press the jog wheel [Y/CROSS] .
3. Turn the jog wheel [Y/CROSS] to the left or right to set the desired value and
press the jog wheel [Y/CROSS] .
ð
The setting is accepted.
4. To return to the next higher menu level without changes, press [SETUP] .
The following settings can be made in the main menu:
No. Display Function
1 RDM function Changes the parameters of all RDM-compatible
devices.
2 Set IP Address Sets the IP address.
The device has a 100 Mbps Ethernet interface. To
use the network function, the IP address must be
set.
3 Set Net Mask Sets the network mask for the Ethernet interface.
4 Set MIDI Sets the MIDI channel.
5 Set Audio Sets the sensitivity of the audio interface.
6 Set Net Protocol Selects the DMX protocol.
The device supports the Art-Net protocol and the
sACN protocol.
Operating
DMX controller
18