thomann MicroMix 2 USB, Руководство пользователя

Страница: 15 / 28

7 [PAIR]
This switch must be pressed to allow the device to pair with Bluetooth sources. The blue LED above the switch indicates
the Bluetooth status: 1 × blink per second: Ready to make the connection. 1 × blink per 5 seconds: Connected. 2 × blinks
per 5 seconds: Connection interrupted.
8 [MONITOR]
Volume control for the Monitor output.
9 [L - CLIP - R]
The ‘L’ or ‘R’ LED lights up green when a signal is present in the respective bus side. It lights up red when overload occurs
in the respective bus side. Then lower the input levels that possibly cause the overload or turn the ‘MAIN MIX’ control
counterclockwise.
10 [MAIN MIX]
Volume control for the ‘MAIN MIX’ output and the USB port.
11 [CH 2/3]
Level control for the signals at input ‘CH2/3’ and at the USB port.
12 [CH1]
Level control for the signals at input ‘CH1’ .
Connections and controls
MicroMix 2 USB
15