thomann LED-Commander 16/2 страница 4 Скачать руководство пользователя

Страница: 4 / 48

General notes

This user manual contains important information on safe operation of the device. Read and

follow all safety notes and all instructions. Save this manual for future reference. Make sure

that it is available to all persons using this device. If you sell the device, include the manual for

the next owner.
Our products are subject to a process of continuous development. We therefore reserve the

right to make changes without notice.

This section provides an overview of the symbols and signal words used in this user manual.

Signal word

Meaning

DANGER!

This combination of symbol and signal word indicates an

immediate dangerous situation that will result in death or

serious injury if it is not avoided.

NOTICE!

This combination of symbol and signal word indicates a pos‐

sible dangerous situation that can result in material and

environmental damage if it is not avoided.

Symbols and signal words

General notes

DMX-controller

Содержание LED-Commander 16/2

















































Результаты поиска

Содержание LED-Commander 16/2

Отзывы:

Похожие инструкции для LED-Commander 16/2

Бренды по названию

Популярные бренды

thomann LED-Commander 16/2, Руководство пользователя

Результаты поиска

Содержание LED-Commander 16/2

Отзывы:

Похожие инструкции для LED-Commander 16/2

Бренды по названию

Популярные бренды