thomann igniton Strip Blinder X 10x75W, Руководство пользователя

Страница: 32 / 44

Press [MODE] repeatedly until the display shows ‘Axxx’ .
Now you can set the number of the first DMX channel to be used by the device (DMX address).
Use the arrow buttons to select a value between 1 and 512 (display shows ‘A001’ … ‘A512’ ).
Make sure that this number matches the configuration of your DMX controller. The following
table shows the highest possible DMX address for the various DMX modes.
Press
[MENU] . Now use the arrow buttons to select one of the following DMX modes:
n
‘CH01’ (one channel)
n
‘CH02’ (two channels)
n
‘CH05’ (five channels)
n
‘CH10’ (ten channels)
DMX mode
Operating
blinder
32