thomann A 10 LA, Руководство пользователя

Страница: 22 / 40

1 INPUT
Audio signal input with lockable XLR chassis socket. The socket is electronically perfectly symmetrical wired to ach‐
ieve an optimal signal-to-noise ratio and a sufficient power reserve, including A / D conversion.
2 [GND LIFT] pushbutton
If hum is caused by a ground loop, you can use this switch to disconnect the connection between the earth pin of the
device and the signal ground of the device. Switching only has an effect when using balanced connection cables.
3 LINK
Audio signal output with XLR chassis plug to connect other line array elements or speakers to which the input signal
is passed.
4 [TERMINATE] pushbutton
If the devices of a line arrays are networked together, the last unit must be terminated with the built-in load resist‐
ance. Press the pushbutton [TERMINATE] . The LED above it lights up.
5, 6 NETWORK IN/OUT
RJ45 CAT5 connectors for establishing a network connection to the CanBus Converter (item number 326058), to the
Pronet software and to the line array elements.
Connections and operating elements
line array element
22