7
Operating
7.1 Starting the device
Connect the device to the power supply to start operation. After a few seconds, the display
indicates that a reset is in progress. The device is then ready for use.
7.2 Main menu
Press
[M]
to activate the main menu. Use the arrow buttons to select an operation mode. When
the display shows the desired value, press
[OK]
. Use the arrow buttons to change the respec‐
tively displayed value. When the display shows the desired value, press
[OK]
.
If you don't press any button for about 1 minute, the unit returns to the previously selected
mode. The set values are retained even when the device is disconnected from the mains
power supply.
Operating
LED PAR
28
Содержание 467321
