When you have selected one of programmes 02 … 14 you can adjust the following settings:
1.
After selecting a programme, press
[Setup]
again and set the program sequence speed
with
[Up]
and
[Down]
in the range from
‘001’
…
‘100’
(slow … fast).
2.
Press
[Setup]
again and set the flashing speed for the strobe function with
[Up]
and
[Down]
in the range from
‘000’
…
‘099’
(slow … fast).
7.2 Operating mode ‘Auto Run Mode’
This operating mode can only be activated when the unit is operating in stand alone mode or
as master in a master / slave combination. This setting is only relevant if the device is not con‐
trolled via DMX.
Press
[Mode]
, use
[Up]
and
[Down]
to select the menu item
‘AUTO’
and confirm with
[Setup]
.
The unit will cycle through the preprogrammed automatic programs.
Settings for programmes
02 … 14
Operating
LED PAR
36
