THMMANDIBULA
11
MANDIBULA SEATPOST
INSTRUCTION BOOK
ASSEMBLY
MANDIBULA ASSEMBLY
INSTALLATION OF THE SADDLE TO THE MANDIBULA
CAUTION
•
When installing the saddle onto the seatpost it can come to a
crushing hazard for your fingers.
•
do not use friction enhancer or carbon paste between the half
shells and the seatpost.
INFO
For easier installation install first the saddle onto the seatpost and
then onto your bicycle.
TIGHTENING TORQUES
COMPONENT (N°.)
MAX. TORQUE IN
N·M (LBF ·IN)
SURFACE TREATMENT
Seatpost (1)/ frame
***
5 (45)
Carbon paste
Titanium M6 screw (8)
8 (71)
dry
Half-shells (2,3,4)
8 (71)
dry
***
Recommended torques in this instruction book are specific for the THM
Mandibula seatpost. Please check the manual of the mating component
(frame, seat clamp) for the recommended torque. Always use the lower
torque recommendation!
WARNING
Risk of accident caused by a malfunctioning seatpost due to loosen
screw connections. Check the required tightening torque of all screw
connections after the first 100 km Re-tighten the connections if
necessary. Repeat this check at least every 2500km!
(Table 3)
