THMMANDIBULA
25
MANDIBULA SEATPOST
INSTRUCTION BOOK
NOTICE
If you are using a hose, handle it with care - never aim the hose
directly at the bearing components (Figure A).
Clean your THM-components at regular intervals by using water and
a non-abrasive, environmentally friendly cleaning agent.
When cleaning your THM components always check for signs of
damage (dents, cracks, scratches, large abrasions, worn areas, etc.).
Periodically preserve the surface of your THM components using a
high quality protecting wax or other similar agent.
(Figure A)
WARRANTY
MATERIALS DEFECT LIABILTY
We provide a 24-month warranty for all THM products which covers
material and processing defects.
During this period all products accepted to be defective are replaced at
no cost to the user.
The liability period starts at the time the relevant THM product was
purchased. Liability does not extend to any kind of damage caused by
accidents, modifcations, negligence or improper handling and use.
Liability shall expire if repair work or any other work on the THM product
has been conducted by unauthorised persons.
The same shall also apply to any direct or indirect damage resulting from
an action described in the preceding sentence.
INFO
Please contact us
before returning a defective THM product!
If products are returned without our previous agreement,
the shipping costs incurred will be charged to your account!
WARRANTY
Minor damage to your THM products will be repaired by our workshop free
of charge even after expiration of the 24-month liability period, provided
that the work required does not exceed 0.5 hrs.
The decision regarding whether or not a repair is to be carried out free of
charge rests solely with us.
If the damage has been self-inficted, there is no entitlement to free
repair work!
In the event of self-inficted damage please send us the product concerned
for inspection. We will then assess the level of work required and either
perform the repair free of charge or send you a
quotation. It is then up to you to decide whether or not to go ahead with
the repair work.
