manualshive.com logo in svg

THK KRF, Инструкция по эксплуатации, Страница: 25 / 87

Поделиться
Скачать
THK KRF Скачать руководство пользователя страница 25

7-1

KRF

7. Installation and Operation

7. 

Installation and Operation

7-1

 

Precautions to be observed for safe use

 

If any moving part may fall by its own weight in vertical application or the like, provide a 
safeguard for preventing the part from falling.

If any moving part falls, it may cause injury or damage.

 

While this product is operating, do not touch any moving part or rotating part.

Otherwise, it may cause your hand to be caught and injured.

 

Firmly secure this product before operating it.

Failure to do so may cause abnormal operation that could cause injury, fault or fracture.

 

If anomaly occurs, immediately stop the machine.

Failure to do so may cause abnormal operation that could cause injury, fault or fracture.

 

Do not exceed the permissible rotation speed when using the product.

Otherwise, it may cause fault or damage,or may cause abnormal operation that could lead to 
injury. Also see the appendix, which contains the permissible rotation speed for each model 
number.

 

Do not use the failed and broken product.

Otherwise, it may cause injury or machine failure.

Caution

Warning

Содержание KRF
























































































Отзывы:

Нет отзывов