2-3
CKSF
2. Safety Precautions
Installation and operation
z
Firmly secure this product before operating it.
Failure to do so may cause abnormal operation that could cause injury, fault or fracture.
z
If anomaly occurs, immediately stop the machine.
Failure to do so may cause abnormal operation that could cause injury, fault or fracture.
z
Anti-rust oil is applied on the table mounting surface and ball screw shaft end.
Thoroughly wipe off the oil before operating the product.
z
Do not exceed the maximum speed when using the product.
Otherwise, it may cause fault or damage,or cause abnormal operation that could lead to injury.
For your reference, see the specification (
→
P.4-1), which contains the maximum speed for each
model number at each stroke.
z
Do not use the failed and broken product.
Otherwise, it may cause injury or machine failure.
www.thk.ru
тел. +7(499) 703-39-86
