background image

2-1

2. Precautions

2.  

Precautions on Use

Ball Screw

2-1

 

Safety Related Warning Displays

This manual uses the following safety related warning displays. Descriptions containing safety 
related warning displays are serious and must be followed. 

  Warning

"A matter which, if mishandled, could result in 

death or serious injury."   

  Caution

"A matter which, if mishandled, could result in 

physical injury or material damage."   

 "Prohibited (never do this)"   

 "Required (always do this)"  

2-2 

 Handling

C A U T I O N

Handle with care

 

z

Please use at least two people to move any product weighing 20 kg or more, or use a dolly or 
other conveyance. Failure to do so could cause injury or damage the product.

Do not disassemble

 

z

Do not disassemble the parts. This could impair the product's functions.

Falling objects

 

z

Tilting the screw shaft and the Ball Screw nut may cause them to fall by their own weight.

 

z

Take care not to drop or strike the Ball Screw. This could cause injury and damage the 
product. If the product is dropped or impacted, functionality may be reduced even if there is 
no surface damage.

Handle with care

 

z

When assembling, be sure not to remove the Ball Screw nut from the Ball Screw shaft.

 

z

When handling the product, wear safety gloves and safety boots, etc., as appropriate to 
ensure safety.

2.  

Precautions on Use

www.thk.ru

тел. +7(499) 703-39-86

[email protected]

Содержание Ball Screw















Отзывы: