in
View
TM
Installation Guide and User Manual v20200824
2 |
P a g e
Installation Overview
These instructions are written to help guide you in installing the inView
TM
brake and turn signal system. There are three
parts to these instructions:
I.
Part one (I) explains how to install the wireless sending unit onto the motorcycle (transceiver unit).
II.
Part two (II) explains how to install the accessory brake light onto the motorcycle
III.
Part three (III) explains how to affix the wireless brake and turn signal LED assembly (receiver unit) onto the
helmet.
Installation Precaution Notice - Please read the following instructions thoroughly before installing the motorcycle
transceiver and helmet receiver units.
NOTE: If at any time during the installation process you feel uncomfortable in performing the tasks documented in
these instructions, please consult an authorized motorcycle service center in your area for help.
I.
Part One: Mounting and Connecting the Motorcycle Transceiver Unit
Required Components:
(1) Transceiver unit
(1) 3M Double-sided foam mounting tape
(4) Posi-Tap
TM
connectors
(1) Alcohol prep pad
Wiring diagrams and schematics as needed
Required tools to access your motorcycle battery, mounting
location and electrical components
Before beginning the installation, take a look at the small motorcycle transceiver box that has the seven wires coming out
of it. Locate space on the motorcycle that is large enough to safely house this box and its wires. The location must be
positioned where the unit is protected from physical harm. While the unit is resistant to moisture, it should be located in a
place where it is not exposed to water or excessive heat. Also consider that it is best if the location is not obscured by large
metal surfaces which can interfere with signal transmission.
IMPORTANT:
Once installed, please update
both
the motorcycle and helmet units with in
View
TM
Brake &
Signal Light iOS or Android in
View
TM
application. Application instructions can be found on our support page:
https://thirdeyedesigninc.com/support/
