GapGun MX+/SPC3d6 Connectivity Guide
© Third Dimension Confidential Document D11-678
Page 32
SPC3d6.0
9.2
COPY CAL FILE TO YOUR SPC3D FOLDER
COPY CAL FILE TO SPC3D
You can copy the cal file from the USB device into your
‘Calibration’ folder within SPC3d on your PC. Navigate to the
SPC3d\Calibration folder in the Third Dimension directory from
within windows explorer. Copy the cal file from the USB device
to this folder.
OPEN CAL FILE SELECTION WINDOW
Click on the Calibration File expansion icon to select the copied
cal file from the SPC3d\Calibration folder.
SELECT CAL FILE TO LOAD
Once clicked this window will appear and you can select the
cal file you copied and then click ‘Open’. The location of your
cal file will be recorded in SPC3d and it will remember where
to load it from every time it is opened. If you have several
heads for different measurement functions you would have a
cal file for each measurement head in this folder.
