- 1 -
1. Safety Precautions
This unit, designed with full consideration for safety, can nonetheless be very dangerous if
used incorrectly. To prevent accidents, please follow the safety instructions below.
Warning
If this unit is used without following the warnings below, a serious accident may
occur to this unit, humans, or the surroundings, due to a fire, electrical shock,
rupture, or other factors.
Never disassemble or modify the main unit.
Connect only to a power source with the rated voltage
Please use adhering to the rated voltage. The rated voltage: single-phase AC100V
r
10%, 50/60 Hz unless specified by unit optionally made for different voltage
areas.
Do not start operation with the lid open.
The lid sensors, equipped on this unit, inhibit the unit from starting when the lid is
open. To start the unit, make sure to close the lid (Check that clothes or other
things are not caught in the lid.).
Do not use in a place where the unit can be dropped or tipped over.
Do not use on an inclined surface.
Do not use in a place where vibrations or impacts are intense.
Do not use on a surface which is lacking in strength.
Do not splash or spill mixtures, solvents, or other materials inside the main
unit.
Due to a chemical reaction, corrosion, or other causes, the unit may be damaged
or cause an electrical shock.
Do not use this unit to mix dangerous, poisonous, or deleterious
substances.
Do not mix material that is dangerous or hazardous to humans.
This unit is not designed to be explosion-proof. Please take careful note that if the
content (especially substances with low boiling points such as organic solvents)
leaks inside the unit, a fire or explosion may occur caused by a temperature rise
or a volume increase resulting from vaporization or chemical reactions of the
content.
