background image

52

10. Troubleshooting

The following table lists the problems users may encounter while using the product and measures to 
resolve them. If the problem persists after taking the measures provided in the table, contact the customer 
service center.

Problems

Solution

Cannot power on the product 

• 

Make sure the power cable (the car charger or the hardwiring cable) is 
connected to the vehicle and the product properly.

• 

Check the vehicle’s battery level.

The voice guide and/or buzzer 
do not sound. 

Check if the volume is set to the minimum. For more information about how to 
adjust the volume, refer to "6.5.2 Adjusting the system volume".

The video is unclear or hardly 
visible.

• 

Ensure that the protective film on the camera lens has been removed. The 
video may look unclear if the protective film is still on the camera lens.

• 

Check the installation location of the front or rear camera, turn on the product, 
and then adjust the camera's viewing angle. 

The memory card cannot be 
recognized.

• 

Ensure that the memory card has been inserted in the correct direction. Before 
inserting the memory card, ensure that the metal contacts on the memory card 
are facing toward the lens of the product.

• 

Turn off the power, remove the memory card, and then check to ensure that the 
contacts in the memory card slot are not damaged.

• 

Ensure that the memory card is an authentic product distributed by 
THINKWARE. THINKWARE does not guarantee compatibility and normal 
operation of third-party memory cards.

The recorded video cannot be 
played on a PC. 

The recorded videos are stored as MP4 video files. Ensure that the video player 
installed on your PC supports the playback of MP4 video files.

GPS signal cannot be received 
even though the external GPS 
receiver is installed.

The GPS signal may not be received in out-of-service areas, or if the product is 
located between tall buildings. Also, GPS signal reception may not be available 
during storms or heavy rain. Try again on a clear day at a location that is known 
to have a good GPS reception. It may take up to 5 minutes until GPS reception is 
established. 

Содержание DC-H1-FG

























































Отзывы: