ThinkVision V200P WIDE, Руководство пользователя

Страница: 26 / 37

To use the Plug and Play feature in Windows XP, files should be loaded from the
Reference and Driver CD .
Note: This section must be completed before continuing with the Windows XP
automatic image setup.
2. Ensure tha� he monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow the system to boot into
Windows XP.
4. Open the Display Properties window by clicking
Panel , and then double-clicking the Display icon.
5. Click the tab.
6. Click the Advanced
7. Click the Monitor tab.
8. Click the Properties
9. Click the Drivers tab.
10. Open the Hardware Update Wizard window by clicking on Update Driver ,
and then click Next .
11. Select
Install from a list or Specific location(Advanced)
, and then click Next .
15. Choose L 200p wD a nd click OK . The files will be copied
from the CD to your hard disk drive.
16. Close all open windows and remove the CD.
17. Restart the system. The system will automatically select the maximum refresh
rate and corresponding Color Matching Profiles.
Note:
On LCD monitors, unlike CRTs, a faster refresh rate does not improve
display quality. Lenovo recommends using either 1680 x 1050 at a refresh rate of 60
Hz, or 640 x 480 at a refresh rate of 60 Hz.
Chapter 3. Reference information
3-5
Installing the monitor driver in Windows XP
13. Click on the Browse
button and navigate to the following directory:
X:\Monitor Drivers\ Windows XP & Windows 2000
(where X is the drive letter designator for the CD-ROM drive).
14. Select the " L200p wD .inf " file and click the Open button. Click the OK button.
Downloaded from ManualMonitor.com Manuals