Using the ThinkRF R5750 Administration Console
26
ThinkRF R5750 Real Time Signal Analyzer User Guide
Restarting the R5750
You can restart the R5750 via the Administration Console. Performing a device reset from
the Administration Console is equivalent to a power-on reset.
To restart the R5750:
1.
Click on the
Restart
link in the left pane of the Administration Console.
2.
In the
R5750 Device Restart
window (main pane), click
Restart
.
Depending on your network settings, the R5750 may obtain a different IP
address after it restarts, which will result in the links to the Administration
Console being interrupted. This will only happen when the unit is not in static IP
address mode or a factory reset has been initiated.
Please check with your network administrator to determine the IP address of the
R5750.
