ThinkPad Edge E530 Скачать руководство пользователя страница 72

Страница: 72 / 118

Removal steps of memory modules

Note:

Your model might look slightly different from the illustration above.

When installing:

Note:

If only one memory module is to be installed on the computer you are servicing, the memory module

must be installed in SLOT-0 (

lower slot), but not in SLOT-1 (

upper slot).

Insert the notched end of the memory module into the slot. Press the memory module firmly, and pivot it
until it snaps into place. Make sure that it is firmly installed in the slot and does not move easily.

1060 Hard disk drive assembly

For access, remove these FRUs in order:
•

“1010 Battery pack” on page 62

•

“1020 Large bottom cover” on page 63

Attention:

• Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper

handling can cause damage and permanent loss of data.

• Before removing the drive, have the user make a backup copy of all the information on it if possible.

• Never remove the drive while the computer is operating or is in suspend mode.

Hardware Maintenance Manual

Содержание Edge E530























































































































Результаты поиска

Содержание Edge E530

Отзывы:

Похожие инструкции для Edge E530

Бренды по названию

Популярные бренды

ThinkPad Edge E530, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание Edge E530

Отзывы:

Похожие инструкции для Edge E530

Бренды по названию

Популярные бренды