25
• Holding any tumbler firmly in one
hand, grasp the collar of any of the
2 blade attachments. Always check
to be sure the ring is present and
properly fitted into the collar before
use. Insert the blade into the top
of tumbler. (See Figure 5.) Use the
other hand to tighten by turning
the blade collar clockwise until well
fit.
WARNING:
Never operate the
Thinkkitchen Dynamic Blending
System when the tumbler is empty.
IMPORTANT:
Always add at least
¼ to ½ cup liquid to food before
processing. It may be necessary to
add more liquid, depending on the
density of the food and the desired
final results.
• Invert the tumbler assembly be-
fore placing on the motor base.
• Insert the blade collar into the mo-
tor base, fitting the tabs into the slots on the motor base (See Figure 6).
Pressing the lid or tumbler firmly down into the base, turn clockwise until
the blade attachment tabs lock securely in position.
• Plug the power cord into a 120V AC electrical outlet. Press the POWER
button. WARNING: To avoid spills, make sure the lid is closed securely
before pressing any PREPROGRAMMED/SPEED buttons.
• Press the desired PRE-PROGRAMMED/SPEED button to begin pro-
cessing.
IMPORTANT:
The Thinkkitchen Dynamic Blending System
will not operate unless the 3 locking tabs on the blade collar are prop-
erly fitted into the 3 slots on the motor base.
IMPORTANT!
Do not
operate this blender without the blade collar firmly twisted into place
onto any of the attachments. Press any PRE-PROGRAMMED/SPEED
button and resume operation.
WARNING:
Do not operate the motor
FIGURE 5
FIGURE 6
NITRO_BLENDER.indd 25
2/26/2016 2:47:47 PM
