background image

ThinkEco modlet™

Thank you for purchasing your new modlet™! 

For more information and to learn about your modlet™ please visit www.thinkeco.com.  Please read all user guides/manuals provided 

to you (in both paper and electronic form) including in the software downloaded in connection with the usage of this device and all 

operating and safety instructions.  If you fail to do so this product may not function properly and may lead to damage to the product 

and to other danger.
Specifications

        •  Electrical Rating:  125V,15A/60Hz/1875W

        •  Operation Power Consumption:  0.3W
Important Safety Information: 

Use indoors in a dry location.  

Do not use this product in connection with critical care equipment (i.e. life-support systems). 

Contains non-user serviceable parts; do not open.

This is a live AC outlet, even when the Modlet is in an “off scheduled mode”.   

This product is not a toy.  Do not allow children to operate it. 

Not intended for use with loads rated above 15 Amps

Do not “daisy-chain” the Modlet.  Only plug the Modlet into a duplex outlet or a grounded extension cord rated 15 Amps or higher.  

In an over current condition or if the Modlet is plugged into an old and/or damaged socket the Modlet and socket temperature may 

increase substantially.  Unplug the Modlet and appliances immediately and discontinue use.  You should contact a qualified electrician to 

inspect and/or replace the outlet.  Connecting a Modlet to an improperly grounded outlet will void all warranties.

UL 916/4989/94 listed
Regulatory Information: Installation and use of this device must be in strict accordance with the instructions included in the user docu-

mentation provided with the product or at www.thinkeco.com. Any changes or modifications made to this device that are not expressly 

approved by the manufacturer may void the user’s authority to operate the equipment. ThinkEco will assume no liability for any damage 

or violation of government regulations arising from failing to comply with these guidelines.
Note: USA-FCC (Federal Communications Commission) statement 

This device complies with Part 15 of FCC Rules. 

Operation is subject to the following two conditions: 

1. This device may not cause interference, and 

2. This device must accept any interference, including interference that may cause undesired operation of this device.
Note: FCC Interference Statement 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. 

These limits are designed to provide reasonable protection against harmful interference in a residential installation. 

This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it 

may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer-

ence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and 

correct the interference by one or more of the following measures: 

1. Reorient or relocate the receiving antenna. 

2. Increase the distance between the equipment and the receiver. 

3. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. 

4. Consult the dealer or an experienced radio/TV technician for help.
LIMITED ONE (1) YEAR WARRANTY

Warranty: ThinkEco warrants that the Modlet(s) will be free from defects in material and workmanship and perform to ThinkEco’s ap-

plicable published specifications for a period of one (1) year from date of delivery to you. The liability of ThinkEco hereunder shall be 

limited to replacing or repairing, at its option, any defective Modlet(s) which are returned F.O.B. ThinkEco’s address set forth below (or, 

at ThinkEco’s option, refunding the purchase price of such Modlet(s)). In no case are Modlets to be returned without first obtaining 

permission and a return order number from ThinkEco. You are responsible for the cost of shipment of the defective Modlet to ThinkEco, 

and ThinkEco is responsible for the cost of shipment of a replacement Modlet to you. In the event you send a Modlet back to ThinkEco, 

and the Modlet is not defective, ThinkEco reserves the right to charge you a fee associated with postage and handling of such Modlet.
Replacement Modlets: Replacement Modlets are warranted by ThinkEco pursuant to the warranty set forth above for the longer of (i) 

thirty (30) days; or (ii) the remaining warranty period for the original Modlet. The replacement Modlet may be refurbished and/or contain 

refurbished parts. 
The following are not covered by this warranty: (i) Modlets which have been subject to abuse, misuse, accident, alteration, neglect, unau-

thorized repair or installation, Acts of God, power surge, wear and tear, mishandling, misapplication, or other causes unrelated to defec-

tive materials or workmanship; and (ii) any damages and/or viruses caused by use of a third party device in conjunction with the Modlets. 

You are responsible for determining if a third party device used in conjunction with the Modlet is suitable for such use and ThinkEco is not 

liable, and this warranty does not cover, any damages caused by, or to, any third party device. ThinkEco will make the final determination 

as to the existence and cause of any alleged defect.  No warranty is made with respect to any custom equipment or goods produced to 

your specifications except as specifically stated in writing by ThinkEco in the contract for such custom goods.  
Disclaimer & Limitation of Liability:  EXCEPT  AS  EXPRESSLY  PROVIDED  ABOVE,  THINKECO  MAKES  NO,  AND  HEREBY  DISCLAIMS 

ALL OTHER, WARRANTIES, EXPRESS, STATUTORY, OR IMPLIED, INCLUDING ANY WARRANTY OF NON-INFRINGEMENT, MERCHANT-

ABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL THINKECO BE LIABLE TO YOU OR ANY THIRD PARTY FOR 

ANY LOST PROFITS, USE OF USER INFORMATION, LOSS OF DATA, BUSINESS INTERRUPTION, OR OTHER INDIRECT, CONSEQUEN-

TIAL, SPECIAL, OR INCIDENTAL DAMAGES OF ANY NATURE ARISING FROM OR RELATING TO YOUR USE OF THE MODLET, EVEN IF 

THINKECO  HAS  BEEN  ADVISED  OF  THE  POSSIBILITY  OF  SUCH  DAMAGES.  IN  NO  EVENT  WILL  THINKECO’S  TOTAL  CUMULATIVE 

LIABILITY  TO  YOU,  FOR  ANY  AND  ALL  CLAIMS  UNDER  ANY  THEORY  OF  LAW,  EXCEED  THE  ORIGINAL  PURCHASE  PRICE  OF  HE 

MODLET IN QUESTION.  
To contact ThinkEco regarding this Limited Warranty, please call ThinkEco at 1-800-682-0152.

Содержание modlet













Отзывы: