3
o
Any installation work must be
carried out by a qualified
electrician or competent person.
o
The hood must be installed in
accordance with the installation
instructions and all measurements
followed.
o
If the cooker hood is
installed for use above a gas
appliance then the provision for
ventilation must be in accordance
with the Australian Standard AS
5601.
o
It is dangerous to alter the
specifications or to modify this
product in any way. Do not tamper
with it or attempt to alter it in the
attempt to customise it further.
o
When installing the hood,
ensure that the following
recommended distances are being
observed between the cooker top
and the bottom of the cooker hood:
9
Electric cookers:
700
mm
9
Gas cookers:
700
mm
9
Coal/ oil cookers:
800
mm
* NOTE - DO NOT SET YOUR
COOKER HOOD LESS THAN
600 mm ABOVE YOUR
COOKER!
o
When installed between
adjoining wall cabinets,
the cabinets must not
overhang the hob and
their undersides must be
at least 50 mm off from
the hob edges.
o
The edges of the cooker
hood are sharp – be
mindful of this as you
handle your appliance,
especially during
installation and cleaning.
DO
NOT
CLEAN
IN
BEHIND
THE
GREASE
FILTERS!
o
If the room where the
cooker hood is to be used
contains a fuel burning
appliance such as a
central heating boiler
then its flue must be of
the sealed or balanced
flue type.
o
If other types of flue or
appliances are fitted,
ensure that there is an
adequate supply of air in
the room.
o
When the hood is being
used in its extractor
function, ensure that the
ducting is fire retardant
and that there are no
bends sharper than 90
degrees as this will
reduce the efficiency of
the hood.
Important Safety Information:
Please Read this before installing & using.
