ModuLam 130 Operators Manual
page 5
B. Preset functions
A number of pre-programmed combinations of temperature and roller speed are accessible from the
control panel. These should provide good starting points when laminating new materials and will
shorten the learning curve as you familiarize yourself with ModuLam laminators.
Can be used for laminating materials that do not require heat (e.g. pressure sensitive
adhesives. A speed = 0 and temperature = 0 (room temperature) are input intot he
controller when this function is selected.
Automatically selected when laminator is first turned on.
This function is configured for applying 40 micron to 80 micron, low temperature
protective laminating film to copier bond or ink-jet media. (temp. = 90°C, speed = 5)
Configured for laminating card stock up to 2 mm thickness with protective films up to 100
microns thick. (temp. = 130°C, speed = 1)
This function is designed for laminating printed circuit substrates with dry-film
photopolymers in a siliconized carrier. Can also be used for laminating photographs with
matting film. (temp. = 110°C, speed = 2)
This is a stand-by function that can be selected when the machine will be idle for a period
of time. The lower temperature extends the life of the rollers and reduces energy
consumption. (temp. = 80°C, speed = 2 )