ThingMagic Mercury6e M6e-30dBm, Руководство по оборудованию

Страница: 77 / 78

Demo Application
Appendix B: Getting Started - Devkit
77
Demo Application
A demo application which supports multi-protocol reading and writing is provided in the
MercuryAPI SDK package. The source code for this example is included in the
MercuryAPI SDK package under /cs/samples/M6e-Read-Write-Demo-Tool. See the
MercuryAPI Programming Guide
for details on using the MercuryAPI.
Demo Tool Notes
The region is only changed upon initialization. You must disconnect the reader,
change the region, and then “Initialize Reader” to change this value.
The protocol search display is only updated when one of the “Read” buttons is
pressed, not when the choice is made via the pull-down menu
“Read on all connected antennas” automatically activates antenna detection and will
ignore ports with an undetectable antenna. To read on these ports, the antenna port
must be explicitly selected.
The “Total tags read in x seconds” display only works for the “Read Once” function,
not Start/Stop Reads.
When “Start Reads” is clicked the M6e will read for the specified timeout with a 2
second delay (RF off) between reads. It is not a continuous read.