manualshive.com logo in svg

ThingMagic Mercury6e M6e-30dBm, Руководство по оборудованию

Поделиться
Скачать
ThingMagic Mercury6e M6e-30dBm Скачать руководство пользователя страница 31

Application Firmware

Firmware Overview

31

Application Firmware 

The application firmware contains the tag protocol code along with all the command 
interfaces to set and get system parameters and perform tag operations. The application 
firmware is, by default, started automatically upon power up. 

Programming the M6e

Applications to control the M6e module and derivative products are written using the high 
level MercuryAPI. The MercuryAPI supports Java, .NET and C programming 
environments. The MercuryAPI Software Development Kit (SDK) contains sample 
applications and source code to help developers get started demoing and developing 
functionality. For more information on the MercuryAPI see the 

MercuryAPI Programmers 

Guide

 and the 

MercuryAPI SDK

, available on the ThingMagic website.

Upgrading the M6e

New features developed for the M6e are made available to existing modules through an 
Application Firmware upgrade, along with corresponding updates to the MercuryAPI to 
make use of the new features. Firmware upgrades can be applied using the MercuryAPI 
to build the functionality into custom applications or using the MercuryAPI SDK demo 
utilities. 

Verifying Application Firmware Image

The application firmware has an image level Cyclic Redundancy Check (CRC) embedded 
in it to protect against corrupted firmware during an upgrade process. (If the upgrade is 
unsuccessful, the CRC will not match the contents in flash.) When the boot loader starts 
the application FW, it first verifies that the image CRC is correct. If this check fails, then 
the boot loader does not start the application firmware and an error is returned.

Содержание Mercury6e M6e-30dBm















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды