© Adolf Thies GmbH & Co. KG · Hauptstraße 76 · 37083 Göttingen · Germany
021690/10/20/short
Phone +49 551 79001-0 · Fax +49 551 79001-65 · [email protected] ·
Page 10 of 16
6
Installation of the USB/RS485 Interface Converter
9.1702.40.002
For the installation of the USB/RS485 interface converter please proceed as follows:
1. Put the USB-plug of the RS485 converter into the provided socket of the PC.
2. The PC identifies a new instrument, and displays it as follows.
3. Select in the dialogue “No, not this time”.
4. Acknowledge the next dialogue with OK.
5. Windows will install the driver for the USB/RS485 converter.
6. After successful completion the instrument is ready for use.
7. In the Windows system control a new COM-port is registered. The program
“ThiesDeviceUtility.EXE” is using this port automatically.
8. Settings for RS485 half-duplex operation.
In half-duplex operation the connections 1,2, and 6 are used. The sliding switches
have to be set as follows:
1: ON
3: OFF
2: OFF
4: OFF
9. Settings for RS485 full-duplex operation.
In full-duplex operation the connections 1,2,3,4, and 6 are used. The sliding switches
must be set as follows:
1: ON
3: ON
2: OFF
4: ON
