THIEMAN TopLifter TT-15, Руководство пользователя

Страница: 11 / 32

11 .
SEMI-ANNUAL INSPECTION
1 . Perform the procedures outlined in the “Monthly Inspection and Maintenance .”
2 . Repaint original painted components as necessary to prevent rust and corrosion from
reducing structural integrity of original components .
3 . Inspect pump motor by:
A . Disconnecting battery cable
B . Remove motor end cover
C . Examine the armature brushes for wear . (Brushes should be replaced if they are
less than 1/8” long .)
D . Clean all residue out from inside of the motor housing .
E . Apply several drops of light weight machine oil to the armature shaft bearing in the
motor cover end and reassemble the motor end cover .
4 . If the hydraulic oil in the reservoir is dirty:
A . Lower the platform completely to the ground .
B. Drain the oil from the hydraulic system and flush the entire system.
C. Remove reservoir from pump and clean suction line filter. Also, clean out any
contaminants from reservoir . Remount reservoir when completed .
D . Replace the oil as outlined in Section 12 under Monthly Inspection and Maintenance .
ACCESSING SPARE TIRE JACK
1 . Lower gate to ground
2 . Remove license plate . It is attached by two #12 screws .
3 . Remove housing cover . It is attached by two .25 screws .
4 . Pry out plug .
NOTE: If towing trailer, you may not be able to access this area .