Thiele UPSW2000HV Скачать руководство пользователя страница 16

Manual UPSW-HV.doc 

16/16

Version 1.10.15 

21  Maintenance 

Only  little  maintenance  is  required  to  keep  your  inverter  and  system  operating  reliable.  The  inverter  must  be 
switched off during maintenance and/or repair activities. It also must be secured against unexpected and uninten-
tional  switching  on.  Therefore  switch  off  the  connection  between  batteries  and  inverter  and  be  sure  that  third 
parties cannot reverse the measures taken.  
The following Steps must be undertaken at least once a year. Check cable and wires for damage and if they are 
still firmly connected. Defects such as loose connections ore damaged cables etc. must be corrected immediately. 
Keep the inverter dry, clean it from dust in order to ensure good heat discharge.  

22  Further assistance and sending the unit for repair 

In the rare case the unit is not working contact your dealer providing him some details as: 

1.

Check Battery voltage, wiring and display for possible failures.

2.

Note: Type of unit and serial number.

3.

Now call your dealer or nearest service center. They will help you with further instructions.

4.

If he recommends sending the unit back for repair, use the original packing.

5.

Include a copy of the invoice (Warranty repair is only possible with a copy of invoice or certificate showing
date of purchase) and a short notice about your system and the failure observed.

6.

In case you have to send the unit over state borders please make sure to fill the correct papers needed for
customs. To reduce time and save money, contact the consignee how to declare the delivery. Arising costs
for customs have to be paid by the sender.

7.

Transport costs to send the unit back to RIPEnergy AG are not covered from Warranty.

YOUR CONNECTION TO SAFETY

Thiele KG 

• V
orderer W

einberg 26 • D-71522 Backnang • T

el.: +49 (0)7191 3560-0 

• Fax.: +49 (0)7191 3560-19 

[email protected] 

• www

.thiele-kg.de

Thiele KG 

• V

orderer W

einberg 26 • D-71522 Backnang • T

el.: +49 (0)7191 3560-0 

• Fax.: +49 (0)7191 3560-19 

[email protected] 

• www

.thiele-kg.de

YOUR CONNECTION TO SAFETY

klick to

www

u-s-v

YOUR CONNECTION TO SAFETY

klick to

www

ACDC-DCDC

YOUR CONNECTION TO SAFETY

klick to

www

SYSTEME

YOUR CONNECTION TO SAFETY

klick to

www

CONTACT

YOUR CONNECTION TO SAFETY

klick to

www

CALLBACK

Содержание UPSW2000HV

















Отзывы: