Thiele UPSW2000HV, Руководство пользователя, Страница: 12 / 16

Manual UPSW-HV.doc 12/16 Version 1.10.15
17.7 Over voltage protection indicator: (OVP)
The over voltage indicator indicates that the power inverter has shut itself down because its input voltage exceed-
ed the maximum input voltage.
17.8 Under voltage protection indicator: (UVP)
The under voltage indicator indicates that the power inverter has shut itself down because its input voltage fell
below minimum input voltage.
17.9 Over temp protection indicator: (OTP)
The over temp indicator indicates that the power inverter has shut itself down because its temp has become over-
heated. The power inverter may overheat because it has been operated at power levels above its rating, or be-
cause it has been installed in a location which does not allow it to dissipate heat properly. The power inverter will
automatically back up, once it has cooled off.
17.10 Overload protection indicator: (OLP)
The overload indicator indicates that the power inverter has shut down. A manual reset is necessary (switch it
OFF and ON again) to restart operation. This is a safety function to protect your battery when the inverter oper-
ates in a remote area.
Model
DC Input over
voltage shutdown DC Input under
voltage shutdown
UPSW2000HV/3000HV 110V 140VDC 90 VDC
UPSW2000HV/3000HV 220V 275 VDC 180 VDC
YOUR CONNECTION TO SAFETY
Thiele KG
• V
orderer W
einberg 26 • D-71522 Backnang • T
el.: +49 (0)7191 3560-0
• Fax.: +49 (0)7191 3560-19
• info@thiele-kg.de
• www
.thiele-kg.de
Thiele KG
• V
orderer W
einberg 26 • D-71522 Backnang • T
el.: +49 (0)7191 3560-0
• Fax.: +49 (0)7191 3560-19
• info@thiele-kg.de
• www
.thiele-kg.de
YOUR CONNECTION TO SAFETY
klick to
www
u-s-v
YOUR CONNECTION TO SAFETY
klick to
www
ACDC-DCDC
YOUR CONNECTION TO SAFETY
klick to
www
SYSTEME
YOUR CONNECTION TO SAFETY
klick to
www
CONTACT
YOUR CONNECTION TO SAFETY
klick to
www
CALLBACK