OPERATING INSTRUCTIONS
TM-CHAIN BLOCKS
B07725-G
EN 06.2022
4 | 12
•
Worn, bent or damaged chain blocks must not be put into operation.
•
Moving parts and the load chain must be lubricated regularly. The brake linings inside the
housing must be kept free of lubricant and dirt.
•
Never operate chain blocks with a twisted, stretched or damaged load chain.
•
Do not remove or cover warning labels located on the device.
•
Do not clean the chain blocks with water or with high pressure cleaner.
•
Do not use chain blocks to lift dangerous goods such as molten or radioactive materials.
•
The brake must be examined for icing in the event of operating temperatures below 3 °C.
•
When dealing with long hook paths (> 3m) the brake linings may overheat when constantly
lowering. Ensure that cooling pauses are taken.
•
Chain blocks are to be taken out of operation if unusual noises occur, the load chain jumps or
jams
.
•
After use or when not ready for use, chain blocks must be secured against unauthorised and
unpermitted use.
•
In the event of doubts about the use, inspection, maintenance or similar things contact your
safety officer or the manufacturer.
•
After modifications, conversions or extensions, the declaration of conformity loses its validity.
3
COMMISSIONING
Prior to using the chain blocks for the first time make sure that
•
the components comply with the order and have not been damaged,
•
test certificate, statement of compliance, and operating instructions are at hand,
•
markings correspond with what is specified in the documentation,
•
the documentation is safely kept in an orderly manner,
•
the load chain is lubricated prior to first use,
•
visibility and functional testing are carried out and documented,
•
inspection deadlines and the qualified persons for examinations are determined,
•
the chain blocks are provided with a test seal and the next inspection date.
Dispose of the packing in an environmentally compatible way according to local rules.
After hanging the chain block, position the lower end of the hand chain at a height of
500 – 1000 mm from the floor. In order to complete this task, you may have to shorten the hand
chain by laterally bending the non-welded connecting link open, shortening the hand chain
respectively and bending the connecting link closed.
Normal chain links are not suitable for use as a connecting link.
