Thern FVC-1000, Руководство пользователя, Страница: 10 / 24

Owner's Manual for Thern Model FVC-1000 Winches page 10
A8018B-1210
3.1
Cleaning the Winch
Clean the winch to remove dirt and help prevent rust and corrosion.
3.1.1
CLEAN THE WINCH every 6 months or whenever it is dirty.
a
WIPE ALL EQUIPMENT to remove dirt and grease.
b
LEAVE A LIGHT FILM of oil on all surfaces to protect them against rust
and corrosion.
c
WIPE OFF excessive amounts of oil to avoid the accumulation of dirt.
3.1.2
REMOVE ALL UNNECESSARY OBJECTS from the area surrounding the
winch.
3.2
Lubricating the Winch
3.2.1
CONSULT MANUFACTURER'S RECOMMENDATIONS for specifi c
information on lubricating the wire rope and other equipment.
3.2.2
LUBRICATE WINCH BEARINGS AND SHAFTS at least every 6 months.
a
APPLY 2 TO 3 DROPS of SAE 30 non-detergent oil to bearings and shafts at
all friction points.
b
ROTATE THE DRUM several times to allow the oil to penetrate, and wipe
off excess oil to avoid accumulation of dirt.
3.2.3
LUBRICATE WINCH GEARS at least every 10 hours of operation.
a
APPLY A LIGHT FILM of open gear lubricant to the gear teeth on all gears.
b
USE SPRAYON 201 or equivalent open gear lube. For dirty conditions use a
dry lubricant such as dry graphite or Moly.
3.2.4
LUBRICATE THE WIRE ROPE by following the wire rope manufacturer's
recommendations.
Important!
• Make sure lubricant has a tem-
perature rating appropriate for
the ambient temperatures of the
operation.
Important!
Increase the frequency of mainte-
nance procedures if the winch is:
• Operated frequently.
• Used to move heavy loads.
• Operated in wet, dirty, hot, or
cold surroundings.