Owner's Manual for Thern 5PA5 and 5PA10 Ensign Series Portable Davit Cranes
page 17
A115771-0617
4.1
Transporting the Crane
4.1.1
PARTIALLY DISASSEMBLE THE CRANE into components that can
be transported. Figure 12 shows a configuration with the mast and boom
secured together.
4.1.2
PACK THE CRANE for transport, using the original packaging materials, if
appropriate.
4.1.3
PACK THE WINCH for transport, using the original packaging materials, if
appropriate. Please see the winch owner’s manual for instructions.
4.1.4
REASSEMBLE THE CRANE at its new location following the instructions
under Section 1.2 - Assembling the Crane.
4.1.5
INSPECT THE CRANE according to the Instructions for Frequent
Inspection before installing it for operation. See Section 3.4.3 - Instructions
for Frequent Inspection.
4.2
Storing the Crane
4.2.1
PARTIALLY DISASSEMBLE THE CRANE and store all parts in a cool
clean place away from corrosive chemicals and moisture.
4.2.2
SEAL THE CRANE in plastic with a desiccant to help protect it from rust,
corrosion, and other damage.
4.2.3
SEAL THE WINCH in plastic with a desiccant to help protect it from rust,
corrosion, and other damage. Please see the winch owner’s manual for
instructions.
4.2.4
REASSEMBLE THE CRANE at its new location according to Section 1.2 -
Assembling the Crane.
4.2.5
INSPECT THE CRANE according to Section 3.4.4 - Instructions for
Periodic Inspection before installing it for operation.
Important!
• Keep a record of what you ship,
and when you send it.
CONFIGURATION
WITH MAST AND
BOOM SECURED.
Figure 12 – Packing the
Crane
