4 STATIC LEGS INSTALLATION
WALL INSTALLATION
The radiator is equipped with a pair of legs to set the heater on the floor. In order
to install them, use the 4 screws (self-tapping screws) to screw the feet to the bottom
of the housing. For this purpose, there are special mounting holes on the bottom
housing. Before fitting, adjust the shape of the feet to the radiator housing.
Using a Phillips screwdriver, tighten the feet to the housing, using two screws per side.
ATTENTION!
Under no circumstances should you place the device without the mounting legs
being screwed onto the device
5
43 cm
92 cm
30 cm
SAFE DISTANCES FROM ELEMENTS
76 cm
60 cm
1000 W
1500 W
2000 W
wall or furnit
ure
wall
windowsill
1
2
3
4
(Fig.1)
Make the right place for assembly.
Keep the required minimum distances from walls, furniture, window sill, etc. (Fig.2)
Mounting holes
4
