5
EN
SAFETY MEASURES
Connection section of this manual. It is prohibited to place
the heater directly under the sockets.
7. The ThermoUp Floor/LED/LED Plus and ThermoUp
Wall thermoelectric element heats up up to 80 degrees.
Try to avoid prolonged contact with the heater during
operation. It is not recommended to leave the heater on
unattended. Special attention should be paid to children
and vulnerable people.
8. The device must be located away from
fl
ammable or
easily deformable objects.
9. The power cord must not come into contact with the hot
surfaces of the heater.
10. It is forbidden to cover the heater during its operation and
to use it to dry clothes and any other objects - this can
lead to overheating and damage to the device. This type
of failure will be considered a non-warranty case.
11. Do not immerse the heater in water or other liquids. The
ThermoUp Floor heater must not be used in the immediate
vicinity of a bath, shower or swimming pool.
12. Disconnect the heater when not in use and before washing
it.
13. Make sure the heater is completely cold before putting it in
its packaging for long-term storage.
14. Do not disassemble the device yourself.
15. Do not make changes to the design of the heater! Any
changes will void the warranty.
16. In case of violation of the correct operation of the device,
contact the authorized service center of the manufacturer
nearest to you for consultation and repair.
ATTENTION!
Do not cover the heater to avoid overheating!
ATTENTION!
The heater should not be used if the glass panels are damaged.
ATTENTION!
The device is not equipped with a room temperature control device. Do not use the device in small
rooms if they are occupied by people who are unable to leave the room on their own and they are
not under constant supervision.
ATTENTION!
When you
fi
rst turn on the heater, it may cause an unpleasant odor associated with the technological
features of the production of the heater. This smell will disappear in the process of using the device.